BMC Garnet is mined from Almandine mineral deposit sources
on the coastal stretch of south India. The Almandine Garnet
is the heaviest and hardest of the all the garnet types in
its own group, which makes it an ideal abrasive grain for
various industrial applications.
Garnet is mined as a gemstone and as an
industrial mineral, but it is valued primarily for its many
industrial applications. Almandine Garnet grains are the most
versatile natural blasting & cutting medium available
in the international market today. Its inherent physical and
chemical uniformity ensures better performance and its repeatability
makes it ideally suitable for the blasting industry. Garnet
is gradually displacing the other substitute blasting media
because of its environment friendly utility and reusability
thus eliminating the health risks associated with other conventional
blasting media.
BMC Garnet is available in a range of tightly
screened abrasive blasting products to suit every application
and site requirement.
12/40
Mesh: One of the most preferred products for
multi-media-water-filtration systems. It can also be used
for specialized application where excessive surface profiling
is required or very high built coating systems are to be removed.
Surface Profile: 100-150 microns.
20/40:
It is an abrasive that can be utilized for heavy-duty coating
removal. It's recyclability and nominal production rates makes
it one of the most preferred repair-grade abrasives.
Surface profile: 75-100 micron.
20/60
Mesh: It is the most cost effective and excellent
abrasive of its kind. Its repeatability makes it suited for
fast and efficient removal of existing coatings when compared
to other traditionally used abrasive medium.
Surface profile: 50-90 microns.
30/60
Mesh: It is perfect for all types of blasting
applications including, removing existing coating, rust and
other contamination. The world's most popular Garnet Blasting
Abrasive Grade, it is an ideal choice for superior surface
preparation for new steel prior to tank coating, for pipelines-both
internal and external, fabricated steel and structures, etc.
Also used for effective removal of mill scale, it is the most
preferred as a Slurry- Blast Grade and High Pressure Hydro-Blasting
Abrasive.
Surface Profile: 50-75 microns.
80
Mesh: Possessing highest efficiency on new
steel/mill scale due to highest grain count per weight/volume
makes it an ideal choice for surface preparation of Aluminium
and non-ferrous surfaces.
120
Mesh: Utilized for surface preparation of
stainless steel and Aluminum where minimum surface roughness
is desired, this abrasive medium can be used on a variety
of pliable and synthetic products too.
|
